headers
salman dinani | 2 Jan 2012 05:40
Picon

Daughtercard SBX stops responding.!!

Hi to all,


I am using my daughtercard "SBX" with USRP N200. I was receiving signals on my receiver and i was transmitting signals as well..but when i connected antennas on both port i.e (port1: "TX/RX" and port 2: "RX") initailly it showas that the transmitted signal is been received but later on when i restarted my USRP since then it is receiving no signal...could any one plz help me wat had happened to my daughter card??it it got damaged? how to chk it that it is damaged or not?

Regards 
Salman Dinani
_______________________________________________
USRP-users mailing list
USRP-users@...
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
Permalink | Reply |
headers
salman dinani | 3 Jan 2012 04:10
Picon

Daughtercard SBX stops responding.!!

Hi to all,

I am using my daughtercard "SBX" with USRP N200. I was receiving signals on
my receiver and i was transmitting signals as well..but when i connected
antennas on both port i.e (port1: "TX/RX" and port 2: "RX") initailly it
showas that the transmitted signal is been received but later on when i
restarted my USRP since then it is receiving no signal...could any one plz
help me wat had happened to my daughter card??it it got damaged? how to chk
it that it is damaged or not?

Regards
Salman Dinani
Permalink | Reply |
headers
Mike McLernon | 3 Jan 2012 13:50
Picon
Favicon

Re: Daughtercard SBX stops responding.!!

Hi Salman,
 
  1. What happens when you go back to using just one antenna?
  2. Do you have any message outputs at your MATLAB command window or your shell?
  3. Do you have any other daughter cards to experiment with?
 
I would be very surprised if you damaged the daughter card simply by connecting two antennas to it.
 
Mike
 
 
-----Original Message-----
From: usrp-users-bounces-p6fHTpcPDZaz3Dx2OeFgIA@public.gmane.org [mailto:usrp-users-bounces-p6fHTpcPDZaz3Dx2OeFgIA@public.gmane.org] On Behalf Of salman dinani
Sent: Monday, January 02, 2012 10:11 PM
To: usrp-users
Subject: [USRP-users] Daughtercard SBX stops responding.!!
 
Hi to all,
 
I am using my daughtercard "SBX" with USRP N200. I was receiving signals on my receiver and i was transmitting signals as well..but when i connected antennas on both port i.e (port1: "TX/RX" and port 2: "RX") initailly it showas that the transmitted signal is been received but later on when i restarted my USRP since then it is receiving no signal...could any one plz help me wat had happened to my daughter card??it it got damaged? how to chk it that it is damaged or not?
 
Regards
Salman Dinani
 
_______________________________________________
USRP-users mailing list
 
 
_______________________________________________
USRP-users mailing list
USRP-users@...
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
Permalink | Reply |

Gmane