Re: Card Asus P7131 hybrid > no signal

On Wed, Apr 30, 2008 at 11:56:48PM +0200, hermann pitton wrote :
> Hi,
> 
> Am Mittwoch, den 30.04.2008, 17:58 +0200 schrieb mahakali:
> > On Wed, Apr 30, 2008 at 12:15:02AM +0200, hermann pitton wrote :
> 
> > > 
> > > Hello,
> > > 
> > > if you have card=112 tuner=61 auto detected something goes very wrong.
> > > 
> > > On any recent "official" code the card should be auto detected as
> > > card=112, tuner=54, which is the tda8290 analog IF demodulator within
> > > the saa7131e and behind its i2c gate is a tda8275ac1 at address 0x61
> > > which is correct in your logs.
> > > 
> > > Hopefully you are only confusing tuner address 61 with tuner type,
> > > auto detection should be OK then.
> > >
> > module saa7134 is now loading with following parameters :
> > 
> > card=112 tuner=54 i2c_scan=1 secam=L
> >  
> > > Analog TV is on the upper antenna connector (cable TV) and you need a
> > > saa7134 insmod option "secam=L" in France. ("modinfo saa7134")
> > > On La Corse may still be some "secam=Lc" broadcast, not sure about that.
> 
> > I don't have any upper or lower connector , only right and link.
> > °right connector is described as RF-FM and link as CAT-TV
>