Chris Carr | 30 Nov 18:48

Bug#422675: Bug still occurs in 2.6.26

I have recently found this problem on an old socket 7 machine with an 
SiS900 network card. The lspci output for the card is

00:0b.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI 
Fast Ethernet (rev 02)

The motherboard is a PC Chips (Hsin Tech) M537DMA33:

http://www.users.zetnet.co.uk/thorfin/motherboards/mb01/motherboard_1.htm

Kernel is 2.6.26 from the Lenny RC1 installer.

I'm afraid I don't know how to troubleshoot this bug. For example, 
earlier messages mention setting the card to half-duplex mode - should I 
try that, and if so how is it done?

I don't seem to get as many of these errors as the previous reporter, 
but enough to notice in the logs.

Grateful for any help,

Many thanks,

Chris

Moritz Muehlenhoff | 7 Dec 17:28
Favicon

Bug#422675: Bug still occurs in 2.6.26

On Sun, Nov 30, 2008 at 05:51:09PM +0000, Chris Carr wrote:
> I have recently found this problem on an old socket 7 machine with an  
> SiS900 network card. The lspci output for the card is
>
> 00:0b.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI  
> Fast Ethernet (rev 02)
>
> The motherboard is a PC Chips (Hsin Tech) M537DMA33:
>
> http://www.users.zetnet.co.uk/thorfin/motherboards/mb01/motherboard_1.htm
>
> Kernel is 2.6.26 from the Lenny RC1 installer.
>
> I'm afraid I don't know how to troubleshoot this bug. For example,  
> earlier messages mention setting the card to half-duplex mode - should I  
> try that, and if so how is it done?

You can use "mii-tools -F" from net-tools for that.

Could you try to reproduce this with a current 2.6.28-rcX kernel (you can use the Debian
config from /boot/config* ) and file a bug at bugzilla.kernel.org if the problem
persists?

Cheers,
        Moritz


Gmane