headers
Insomniactoo | 7 May 2012 02:57
X-Face
Favicon

Camstream...

Hi folks,

  Has anyone been able to get camstream to run on 13.37? 
<http://www.smcc.demon.nl/camstream/>

  I like this better than any other webcam app I've tried in the past years and 
the built-in ftp server makes it even better.

  I try to configure it and I get:

No Qt library/headers found! Either specify the correct path with --with-qt
or install the development package. Try 'apt-get install libqt3-mt-dev' on
Ubuntu, for example. Also make sure the multi-threaded, shared library
is installed.

--

-- 
Powered by Slackware 13.37
 19:53:25 up  8:28,  3 users,  load average: 0.76, 0.96, 4.06

Properly read, the Bible is the most potent force for atheism ever conceived.  -
Isaac Asimov

Registered Linux user #214117 at http://linuxcounter.net
Permalink | Reply |
headers
Srdjan Todorovic | 7 May 2012 10:30

Re: Camstream...

On 7 May 2012 01:57, Insomniactoo <Insomniactoo <at> localnet.com> wrote:
>  Has anyone been able to get camstream to run on 13.37?
> <http://www.smcc.demon.nl/camstream/>

>  I try to configure it and I get:
>
> No Qt library/headers found! Either specify the correct path with --with-qt
> or install the development package. Try 'apt-get install libqt3-mt-dev' on
> Ubuntu, for example. Also make sure the multi-threaded, shared library
> is installed.

Wow! That's old.

See if you can get Qt-3.3.7 or similar version as a package for Slackware
somewhere, or download it from Nokia here ( ftp://ftp.qt.nokia.com/qt/source/ ).
Hopefully you'll be able to build it.

Camstream says it needs Qt 2.3 or later - I'm not sure if 2.x and 3.x versions
are binary/source compatible. Qt 3.x and 4.x (used nowadays) are not.

Regards,
Srdjan

_______________________________________________
slackware mailing list
slackware <at> mailman.lug.org.uk
https://mailman.lug.org.uk/mailman/listinfo/slackware
Permalink | Reply |
headers
Insomniactoo | 7 May 2012 12:56
X-Face
Favicon

Re: Camstream...

On Monday, 07 May 2012 03:30 Srdjan Todorovic wrote:

> On 7 May 2012 01:57, Insomniactoo <Insomniactoo <at> localnet.com> wrote:
> >  Has anyone been able to get camstream to run on 13.37?
> > <http://www.smcc.demon.nl/camstream/>
> > 
> >  I try to configure it and I get:
> > 
> > No Qt library/headers found! Either specify the correct path with
> > --with-qt or install the development package. Try 'apt-get install
> > libqt3-mt-dev' on Ubuntu, for example. Also make sure the
> > multi-threaded, shared library is installed.
> 
> Wow! That's old.
> 
> See if you can get Qt-3.3.7 or similar version as a package for Slackware
> somewhere, or download it from Nokia here (
> ftp://ftp.qt.nokia.com/qt/source/ ). Hopefully you'll be able to build it.
> 
> Camstream says it needs Qt 2.3 or later - I'm not sure if 2.x and 3.x
> versions are binary/source compatible. Qt 3.x and 4.x (used nowadays) are
> not.
> 
> Regards,
> Srdjan
> 

  Thanks for the suggestions, Srdjan. At that ftp site, should I get the 'x11' 
package? Also, how should I build it so that my system still uses the modern Qt 
that came with 13.37 and not the old version I want to have just for this app?
(Continue reading)

Permalink | Reply |
headers
Srdjan Todorovic | 7 May 2012 13:00

Re: Camstream...

On 7 May 2012 11:56, Insomniactoo <Insomniactoo <at> localnet.com> wrote:
>  Thanks for the suggestions, Srdjan. At that ftp site, should I get the 'x11'
> package? Also, how should I build it so that my system still uses the modern Qt
> that came with 13.37 and not the old version I want to have just for this app?

I would try this first:
http://slackbuilds.org/repository/13.37/libraries/qt3/

That should have instructions on how to build it. Download the Qt3 source from
the link on that page, and the qt3.tar.gz slackbuild, then extract them and run
the script in the qt3.tar.gz file to create a slackware package.

It would be a lot easier than configuring and installing Qt manually.

Regards,
Srdjan

_______________________________________________
slackware mailing list
slackware <at> mailman.lug.org.uk
https://mailman.lug.org.uk/mailman/listinfo/slackware
Permalink | Reply |
headers
Insomniactoo | 8 May 2012 15:16
X-Face
Favicon

Re: Camstream...

On Monday, 07 May 2012 06:00 Srdjan Todorovic wrote:

> On 7 May 2012 11:56, Insomniactoo <Insomniactoo <at> localnet.com> wrote:
> >  Thanks for the suggestions, Srdjan. At that ftp site, should I get the
> > 'x11' package? Also, how should I build it so that my system still uses
> > the modern Qt that came with 13.37 and not the old version I want to
> > have just for this app?
> 
> I would try this first:
> http://slackbuilds.org/repository/13.37/libraries/qt3/
> 
> That should have instructions on how to build it. Download the Qt3 source
> from the link on that page, and the qt3.tar.gz slackbuild, then extract
> them and run the script in the qt3.tar.gz file to create a slackware
> package.
> 
> It would be a lot easier than configuring and installing Qt manually.
> 

  Okay, I got the right/needed Qt package installed and ./configure finds it 
after I exported where it was. Now a new problem popped up during 'make'. I get 
this:

----------
In file included from common/AudioCollector.cpp:45:0:
common/../linux/AudioDeviceArts.h:28:19: fatal error: artsc.h: No such file or 
directory
compilation terminated.
make[3]: *** [AudioCollector.o] Error 1
make[3]: Leaving directory `/home/john/camstream-091020/audiodevs'
(Continue reading)

Permalink | Reply |
headers
John Crowhurst | 8 May 2012 16:50
Picon

Re: Camstream...

The author of Camstream suggests building with qt2.3.x not qt3, which 
could explain why development stopped in 2003.

http://www.smcc.demon.nl/camstream/

I looked around and discovered a program with the same name here, so it 
might do what you want it:

https://github.com/tonyg/camstream

Best,

John

On 08/05/2012 14:16, Insomniactoo wrote:
> On Monday, 07 May 2012 06:00 Srdjan Todorovic wrote:
>
>> On 7 May 2012 11:56, Insomniactoo<Insomniactoo <at> localnet.com>  wrote:
>>>   Thanks for the suggestions, Srdjan. At that ftp site, should I get the
>>> 'x11' package? Also, how should I build it so that my system still uses
>>> the modern Qt that came with 13.37 and not the old version I want to
>>> have just for this app?
>> I would try this first:
>> http://slackbuilds.org/repository/13.37/libraries/qt3/
>>
>> That should have instructions on how to build it. Download the Qt3 source
>> from the link on that page, and the qt3.tar.gz slackbuild, then extract
>> them and run the script in the qt3.tar.gz file to create a slackware
>> package.
>>
(Continue reading)

Permalink | Reply |
headers
Insomniactoo | 9 May 2012 01:31
X-Face
Favicon

Re: Camstream...

On Tuesday, 08 May 2012 09:50 John Crowhurst wrote:

> The author of Camstream suggests building with qt2.3.x not qt3, which
> could explain why development stopped in 2003.
> 
> http://www.smcc.demon.nl/camstream/
> 
> I looked around and discovered a program with the same name here, so it
> might do what you want it:
> 
> https://github.com/tonyg/camstream
> 

  Development stopped in '09 and Qt3 works.

  Not the same 'camstream'. Seems this one took the name since the other hasn't 
been done anything with lately or this developer just didn't know the name was 
already in use.

--

-- 
Powered by Slackware 13.37
 18:29:06 up 52 min,  2 users,  load average: 0.80, 0.80, 0.78

Properly read, the Bible is the most potent force for atheism ever conceived.  -
Isaac Asimov

Registered Linux user #214117 at http://linuxcounter.net
Permalink | Reply |
headers
Srdjan Todorovic | 8 May 2012 19:02

Re: Camstream...

On 8 May 2012 14:16, Insomniactoo <Insomniactoo <at> localnet.com> wrote:
>  Okay, I got the right/needed Qt package installed and ./configure finds it
> after I exported where it was. Now a new problem popped up during 'make'. I get
> this:
>
> ----------
> In file included from common/AudioCollector.cpp:45:0:
> common/../linux/AudioDeviceArts.h:28:19: fatal error: artsc.h: No such file or
> directory
> compilation terminated.
> make[3]: *** [AudioCollector.o] Error 1
> make[3]: Leaving directory `/home/john/camstream-091020/audiodevs'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory `/home/john/camstream-091020/audiodevs'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/home/john/camstream-091020'
> ----------

Interestingly, the 0.27 source doesn't mention Arts at all...
Maybe try building with that and see if you have better luck?

Regards,
Srdjan

_______________________________________________
slackware mailing list
slackware <at> mailman.lug.org.uk
https://mailman.lug.org.uk/mailman/listinfo/slackware
Permalink | Reply |
headers
Insomniactoo | 9 May 2012 01:28
X-Face
Favicon

Re: Camstream...

On Tuesday, 08 May 2012 12:02 Srdjan Todorovic wrote:

> On 8 May 2012 14:16, Insomniactoo <Insomniactoo <at> localnet.com> wrote:
> >  Okay, I got the right/needed Qt package installed and ./configure finds
> > it after I exported where it was. Now a new problem popped up during
> > 'make'. I get this:
> > 
> > ----------
> > In file included from common/AudioCollector.cpp:45:0:
> > common/../linux/AudioDeviceArts.h:28:19: fatal error: artsc.h: No such
> > file or directory
> > compilation terminated.
> > make[3]: *** [AudioCollector.o] Error 1
> > make[3]: Leaving directory `/home/john/camstream-091020/audiodevs'
> > make[2]: *** [all-recursive] Error 1
> > make[2]: Leaving directory `/home/john/camstream-091020/audiodevs'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory `/home/john/camstream-091020'
> > ----------
> 
> Interestingly, the 0.27 source doesn't mention Arts at all...
> Maybe try building with that and see if you have better luck?
> 
> Regards,
> Srdjan
> 

  Well, that seemed to solve the build problem and camstream even started up, 
but it can't find the webcam. Sucks even worse that I got it to work in openSuSE 
11.3 somehow (though it's got a bad green tint to it that's too hard to actually
(Continue reading)

Permalink | Reply |

Gmane