This list is dedicated to the regulatory, legislative and best practices of the WISP industry

Mike Hammett | 2 Jul 2012 18:00

Re: [WISPA] ATA and POE built into router -- need opinions

That would be great, though most ATAs I have used that weren't Sipura based were junk, so I do wish you good luck.

-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com

----- Original Message -----
From: "John McDowell" <john <at> readynetsolutions.com>
To: af <at> afmug.com, wireless <at> wispa.org, members <at> wispa.org
Sent: Monday, July 2, 2012 10:56:36 AM
Subject: [WISPA] ATA and POE built into router -- need opinions

All, 

If you feel you could benefit from a SOHO router with built in POE, built in ATA or both, please email me on or
off list with your comments and opinions. What are you currently using for ATA/POE, what percentage of
your customers are voip customers, etc? What ATA do you use now? 

Sincerely, 

John McDowell 
Sales Executive 
Direct: 801.984.5137 
Cell: 256.996.0252 
john <at> readynetsolutions.com 
www.readynetsolutions.com 

_______________________________________________
Wireless mailing list

(Continue reading)

headers

Joey Craig | 2 Jul 2012 18:24

Re: [WISPA] ATA and POE built into router -- need opinions

Linksys SPA2102

Joey Craig

Network/RF Engineer

Firenet1.Com

Phone: (662) 510-0764

Mobile: (662) 404-1118

From: wireless-bounces <at> wispa.org [mailto:wireless-bounces <at> wispa.org] On Behalf Of John McDowell
Sent: Monday, July 02, 2012 10:57 AM
To: af <at> afmug.com; wireless <at> wispa.org; members <at> wispa.org
Subject: [WISPA] ATA and POE built into router -- need opinions

All,

If you feel you could benefit from a SOHO router with built in POE, built in ATA or both, please email me on or off list with your comments and opinions. What are you currently using for ATA/POE, what percentage of your customers are voip customers, etc? What ATA do you use now?

Sincerely,

John McDowell
Sales Executive
Direct: 801.984.5137
Cell: 256.996.0252
john <at> readynetsolutions.com
www.readynetsolutions.com

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

headers

Chuck Hogg | 2 Jul 2012 18:40

Re: [WISPA] ATA and POE built into router -- need opinions

Those are obsolete.

Regards,
Chuck

On Mon, Jul 2, 2012 at 12:24 PM, Joey Craig <joey.craig <at> firenet1.com> wrote:

Linksys SPA2102

Joey Craig

Network/RF Engineer

Firenet1.Com

Phone: (662) 510-0764

Mobile: (662) 404-1118

From: wireless-bounces <at> wispa.org [mailto:wireless-bounces <at> wispa.org] On Behalf Of John McDowell
Sent: Monday, July 02, 2012 10:57 AM
To: af <at> afmug.com; wireless <at> wispa.org; members <at> wispa.org

Subject: [WISPA] ATA and POE built into router -- need opinions

All,

If you feel you could benefit from a SOHO router with built in POE, built in ATA or both, please email me on or off list with your comments and opinions. What are you currently using for ATA/POE, what percentage of your customers are voip customers, etc? What ATA do you use now?

Sincerely,

John McDowell
Sales Executive
Direct: 801.984.5137
Cell: 256.996.0252
john <at> readynetsolutions.com
www.readynetsolutions.com

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

headers

Doug Clark | 2 Jul 2012 18:44

Re: [WISPA] ATA and POE built into router -- need opinions

Why?

-------Original Message-------

From: Chuck Hogg

Date: 7/2/2012 10:40:58 AM

To: WISPA General List

Subject: Re: [WISPA] ATA and POE built into router -- need opinions

Those are obsolete.

Regards,
Chuck

On Mon, Jul 2, 2012 at 12:24 PM, Joey Craig <joey.craig <at> firenet1.com> wrote:

Linksys SPA2102

Joey Craig

Network/RF Engineer

Firenet1.Com

Phone: (662) 510-0764

Mobile: (662) 404-1118

From: wireless-bounces <at> wispa.org [mailto:wireless-bounces <at> wispa.org] On Behalf Of John McDowell
Sent: Monday, July 02, 2012 10:57 AM
To: af <at> afmug.com; wireless <at> wispa.org; members <at> wispa.org

Subject: [WISPA] ATA and POE built into router -- need opinions

All,

If you feel you could benefit from a SOHO router with built in POE, built in ATA or both, please email me on or off list with your comments and opinions. What are you currently using for ATA/POE, what percentage of your customers are voip customers, etc? What ATA do you use now?

Sincerely,

John McDowell
Sales Executive
Direct: 801.984.5137
Cell: 256.996.0252
john <at> readynetsolutions.com
www.readynetsolutions.com

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

headers

Josh Luthman | 2 Jul 2012 18:54

Re: [WISPA] ATA and POE built into router -- need opinions

Probably because Cisco is making a new model that's twice as expensive but half the manufacturing cost...

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Mon, Jul 2, 2012 at 12:44 PM, Doug Clark <dc <at> txox.com> wrote:

Why?

-------Original Message-------

From: Chuck Hogg

Date: 7/2/2012 10:40:58 AM

To: WISPA General List

Subject: Re: [WISPA] ATA and POE built into router -- need opinions

Those are obsolete.

Regards,
Chuck

On Mon, Jul 2, 2012 at 12:24 PM, Joey Craig <joey.craig <at> firenet1.com> wrote:

Linksys SPA2102

Joey Craig

Network/RF Engineer

Firenet1.Com

Phone: (662) 510-0764

Mobile: (662) 404-1118

From: wireless-bounces <at> wispa.org [mailto:wireless-bounces <at> wispa.org] On Behalf Of John McDowell
Sent: Monday, July 02, 2012 10:57 AM
To: af <at> afmug.com; wireless <at> wispa.org; members <at> wispa.org

Subject: [WISPA] ATA and POE built into router -- need opinions

All,

If you feel you could benefit from a SOHO router with built in POE, built in ATA or both, please email me on or off list with your comments and opinions. What are you currently using for ATA/POE, what percentage of your customers are voip customers, etc? What ATA do you use now?

Sincerely,

John McDowell
Sales Executive
Direct: 801.984.5137
Cell: 256.996.0252
john <at> readynetsolutions.com
www.readynetsolutions.com

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

headers

Mike Hammett | 2 Jul 2012 20:32

Re: [WISPA] ATA and POE built into router -- need opinions

EOL. http://www.cisco.com/en/US/products/ps10026/index.html

-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com

----- Original Message -----
From: "Doug Clark" <dc <at> txox.com>
To: "WISPA General List" <wireless <at> wispa.org>
Sent: Monday, July 2, 2012 11:44:55 AM
Subject: Re: [WISPA] ATA and POE built into router -- need opinions

	

Why? 

-------Original Message------- 

From: Chuck Hogg 
Date: 7/2/2012 10:40:58 AM 
To: WISPA General List 
Subject: Re: [WISPA] ATA and POE built into router -- need opinions 
Those are obsolete. 

Regards, 
Chuck 

On Mon, Jul 2, 2012 at 12:24 PM, Joey Craig < joey.craig <at> firenet1.com > wrote: 

Linksys SPA2102 

Joey Craig 

Network/RF Engineer 

Firenet1.Com 

Phone: (662) 510-0764 

Mobile : (662) 404-1118 

From: wireless-bounces <at> wispa.org [mailto: wireless-bounces <at> wispa.org ] On Behalf Of John McDowell 
Sent: Monday, July 02, 2012 10:57 AM 
To: af <at> afmug.com ; wireless <at> wispa.org ; members <at> wispa.org 

Subject: [WISPA] ATA and POE built into router -- need opinions 

All, 

If you feel you could benefit from a SOHO router with built in POE, built in ATA or both, please email me on or
off list with your comments and opinions. What are you currently using for ATA/POE, what percentage of
your customers are voip customers, etc? What ATA do you use now? 

Sincerely, 

John McDowell 
Sales Executive 
Direct: 801.984.5137 
Cell: 256.996.0252 
john <at> readynetsolutions.com 
www.readynetsolutions.com 

_______________________________________________ 
Wireless mailing list 
Wireless <at> wispa.org 
http://lists.wispa.org/mailman/listinfo/wireless 

_______________________________________________ 
Wireless mailing list 
Wireless <at> wispa.org 
http://lists.wispa.org/mailman/listinfo/wireless 

	
		
_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

headers

Chuck Hogg | 2 Jul 2012 23:17

Re: [WISPA] ATA and POE built into router -- need opinions

http://www.cisco.com/en/US/products/ps10024/prod_eol_notices_list.html

Regards,
Chuck

On Mon, Jul 2, 2012 at 12:44 PM, Doug Clark <dc <at> txox.com> wrote:

Why?

-------Original Message-------

From: Chuck Hogg

Date: 7/2/2012 10:40:58 AM

To: WISPA General List

Subject: Re: [WISPA] ATA and POE built into router -- need opinions

Those are obsolete.

Regards,
Chuck

On Mon, Jul 2, 2012 at 12:24 PM, Joey Craig <joey.craig <at> firenet1.com> wrote:

Linksys SPA2102

Joey Craig

Network/RF Engineer

Firenet1.Com

Phone: (662) 510-0764

Mobile: (662) 404-1118

From: wireless-bounces <at> wispa.org [mailto:wireless-bounces <at> wispa.org] On Behalf Of John McDowell
Sent: Monday, July 02, 2012 10:57 AM
To: af <at> afmug.com; wireless <at> wispa.org; members <at> wispa.org

Subject: [WISPA] ATA and POE built into router -- need opinions

All,

If you feel you could benefit from a SOHO router with built in POE, built in ATA or both, please email me on or off list with your comments and opinions. What are you currently using for ATA/POE, what percentage of your customers are voip customers, etc? What ATA do you use now?

Sincerely,

John McDowell
Sales Executive
Direct: 801.984.5137
Cell: 256.996.0252
john <at> readynetsolutions.com
www.readynetsolutions.com

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

headers

CBB - Jay Fuller | 2 Jul 2012 18:45

Re: [WISPA] ATA and POE built into router -- need opinions

Yup. I haven't found a device that will function similar to a "openrange" modem, either, with

say, a 2.5 receive chip, and rebroadcast wifi, phone, etc.

----- Original Message -----

From: John McDowell

To: af <at> afmug.com ; wireless <at> wispa.org ; members <at> wispa.org

Sent: Monday, July 02, 2012 10:56 AM

Subject: [WISPA] ATA and POE built into router -- need opinions

All,

If you feel you could benefit from a SOHO router with built in POE, built in ATA or both, please email me on or off list with your comments and opinions. What are you currently using for ATA/POE, what percentage of your customers are voip customers, etc? What ATA do you use now?

Sincerely,

John McDowell
Sales Executive
Direct: 801.984.5137
Cell: 256.996.0252
john <at> readynetsolutions.com
www.readynetsolutions.com

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

_______________________________________________
Wireless mailing list
Wireless <at> wispa.org
http://lists.wispa.org/mailman/listinfo/wireless